FACE/CORE DISBONDING FRACTURE OF HONEYCOMB CORE SANDWICH PANELS

The objective of the research presented in this thesis is to develop analysis and test procedures for the characterization of disbonding crack growth in a honeycomb (HC) core sandwich structure. Face sheet-to-core disbonding are of particular interest to aircraft certification authorities due to several in-service occurrences. Experimental investigation was initially focused on the mode I dominated Single Cantilever Beam (SCB) test method. Various data reduction methodologies were employed to determine the fracture toughness. The MBT method produced the most consistent and conservative results. Finite element analysis (FEA) a double periodic array of hexagonal cells was conducted to determine the effective in-plane extensional modulus and Poisson ratio of the HC core. It was shown that deformation constraints on the core, due to attachment of the core to rigid face sheets, will drastically change the behavior of the HC core. The response changes from being governed by bending to stretching which substantially elevates the effective in-plane modulus. Fracture mechanics analysis of a face/core interface crack in a HC core SCB specimen was performed using FEA. The influence of in-plane properties of the constrained core on energy release rate and mode mixity phase angle was examined. Use of plane strain conditions and an elevated modulus of the constrained core in the analysis is recommended. The approach is substantiated by testing of HC core SCB sandwich. Test results showed good agreement with FEA prediction of compliance and kink angle.