Sanitary sewer evaluation of inflow/infiltration reduction techniques

Substantial savings in operations can be achieved by reducing the amount of wastewater that must be pumped and treated. Utilities have long dealt with the infiltration and inflow (I and I) issues in their system by televising their pipes and identifying leak points, but this primarily addresses only the infiltration part of “I and I.” Inflow, which creates hydraulic issues during rain events, leads to sanitary sewer overflows and can subject the utility to fines from regulatory agencies. As a result, dealing with the inflow portion of I and I is needed. The goal of this thesis is to differentiate inflow and infiltration from baseflow and to determine the effectiveness of different methods used to reduce inflow and infiltration in sanitary sewer lines. An analysis was conducted on the benefits and cost effectiveness of different inflow/infiltration approaches (slip-lining sewer lines, stormwater manhole inserts, replacing sewer lines, smoke testing, etc.) and cost savings municipalities can expect to receive from each.