Temperature effects on baralyme, sodasorb, and lithium hydroxide

Baralyme, Sodasorb, and lithium hydroxide remove carbon dioxide by the chemical reaction which is effected by change in temperature. The three absorbents were studied to observe the influence of change in temperature on the efficiency of the reaction. The inlet gas containing 1.0% carbon dioxide passed through the absorption tube at a constant rate of about 280 cm3/min. The breakthrough of the absorbent is an exit concentration of 0.5% carbon dioxide. The relative humidity was maintained at 90% for all tests.

This document is the accepted manuscript version of a published work that appeared in final form in Industrial & Engineering Chemistry Process Design & Development after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/i260054a017. This article may be cited as: Wang, T. C. (1975). Temperature effects on baralyme, sodasorb, and lithium hydroxide. Industrial & Engineering Chemistry Process Design & Development, 14(2), 191-193. doi:10.1021/i260054a017

Florida Atlantic University. Harbor Branch Oceanographic Institute contribution #19.