Structural analysis (Engineering)

Studies of composite multihull structure under wave loads, extreme loads, and blast loads have been conducted using finite element and computational fluid dynamics (CPF) tools. A comprehensive finite element tool for structural analysis of composite multi-hull structures is developed. Two-way fluid structure interaction (FSI) is implemented by coupling finite element analysis (FEA) and CFD. FEA models have been developed using sandwich construction having composite face sheets and a foam core. Fluid domain was modeled using the CFD code, CFX and a wave motion was simulated based on Sea State 5... In addition to hydrodynamic loads, the simulation of composite ship under extreme loads is performed. Stress analysis was performed and dynamic response of the hull was determined in time domain. In the final analysis, an underwater explosion model was developed to study the composite hull resistance to blast load.

The western and northern parts of South Florida have shallow layers of organic and plastic soils under existing roads. These roads often exhibit large amount of cracking and distortion in a short period of time. Traditional repairs are often not practical due to high costs and extended construction time. In an effort to develop rehabilitation strategies that could be strictly applied to the surface layer, a pilot test site was selected along the alignment of SR 15/US 98 in northwest Palm Beach County, where severe pavement distresses were observed due to the presence of thick organic layers. PaveTrac MT-1, GlasGrid 8501, PetroGrid 4582, and ARMI were used as promising asphalt reinforcing products in 24 experimental pavement sections, including 8 control sections without any reinforcement. A comprehensive field testing and monitoring program involving FWD, rut and ride quality measurements was conducted at the preconstruction, 6-month post-construction, and 18-month post-construction stages. Due to large variability in the sub-surface conditions, a statistics-based data analysis protocol was developed for performance evaluation and relative comparisons of the test sections and, in turn, reinforcing products. Post construction data from both 6 months and 18 months demonstrated that stiffness of reinforced sections were significantly higher than the control sections. Procedures were developed to identify and statistically quantify the benefits derived from the reinforcements only, so that the relative performance of various products could be monitored over time. Based on the field testing data available to date, a framework was developed in this study for the prediction of pavement life, which is essential for conducting a detailed Life Cycle Analysis