NANOPARTICLE-INDUCED CATALYTIC CARBON CAPTURE: A MICROFLUIDICS APPROACH

Due to technological advancement, energy consumption and demand have been increasing significantly, primarily satisfied by fossil fuel consumption. This reliance on fossil fuels results in substantial greenhouse gas emissions, with CO₂ being the most prominent contributor to global warming. To mitigate this issue and prevent CO₂ emissions, Carbon Capture, Utilization, and Storage (CCUS) technologies are employed. Among these, the amine scrubbing method is widely used due to its high CO2 capture efficiency and regenerative ability. However, this method has drawbacks, including high toxicity, corrosion, and substantial freshwater consumption.
To develop an environmentally sustainable carbon capture solution, researchers are exploring alternatives such as the use of seawater and enhanced CO2 capture with catalysts. In this study, we analyze the catalytic performance of nickel nanoparticles (NiNPs) in seawater with carboxymethyl cellulose (CMC) polymers. Using flow-focusing geometry-based microfluidic channels, we investigated CO₂ dissolution at various concentrations of nanoparticles and CMC polymers. The objective is to optimize the concentration of nanoparticles and CMC polymers for effective CO₂ dissolution. We utilized NiNPs with diameters of 100 nm and 300 nm in CMC concentrations of 100 ml/L, 200 ml/L, and 300 ml/L. Additionally, NiNP concentrations ranging from 6 mg/L to 150 mg/L were tested for CO₂ dissolution in seawater. The results indicated that a concentration of 10 mg/L NiNPs in 100 mg/L CMC provided a CO₂ dissolution of 57%, the highest for this specific CMC concentration. At CMC concentrations of 200 ml/L and 300 ml/L, NiNP concentrations of 70 mg/L and 90 mg/L achieved CO₂ dissolution rates of 58.8% and 67.2%, respectively.